deckconstructiontips

 

Decks are sometimes an extension of the living areas of the home and are part of garden landscaping. This is a flat surface which is capable of supporting weight and is usually elevated from the ground like a floor. After the 1960s, due to over logging, the use of softwoods has declined and shifted to hardwoods when it was softwoods that are being used for deck construction back in the days. For spaces like cooking, dining and seating, it is more durable and looks better. In this article, you will learn the easiest ways on how to build your own deck. These methods at http://totalbuildinc.net/deck-and-patio-services/deck-construction/ have been passed down from generations of wood workers. If you will understand the basics of deck construction, and tempt to do it yourself is feasible. Even if you are unsure with your carpentry skills, all you have to do is to focus on the basic principles of construction.

 

It is best to determine first with your local building authorities if there are any restrictions and or if building permits are required according to Inverness Deck Construction at http://totalbuildinc.net/deck-and-patio-services/ before even contemplating a deck. To build it close to your property lines, some will require you to reach this certain height, dimensions of railings, structural supports, and dimensions of stairways, by some community requirements. You have to remember that if you have carefully considered all the possibilities up front and your options, you can expect that things will go smoother.

 

After a careful planning and considering all your options, you will have to procure all the tools and materials you will need for your project. It is best to buy them, or if you don't own them yet you can buy them.

 

The typical tools you will need.

 

1.Circular Saw

 

2.Table Saw

 

3.Power Miter Saw

 

4.Wheelbarrow

 

5.Carpenter's Level

 

6.Shovel

 

7.Caulk gun

 

8.Carpenter's Square

 

9.Wrenches

 

10.Drill and bits

 

11.Hammer

 

The typical materials you will need.

 

1.Caulk

 

2.Metal flashing

 

3.Gravel

 

4.Post Caps

 

5.Post bases

 

 

6.Cinder blocks

 

7.Pre-mixed concrete mix

 

8.Joist hangers and nails

 

9.Metal rebar

 

10.Seismic ties

 

11.Cardboard tube concrete forms

 

12.Deck screws or HDG nails

 

13.HDG bolts and washers

 

You will also need a lot of lumber in different dimensions, including 6 x 6 or 4 x 4 posts, 2 x 10 or 2 x 12s for beams and joists, 2 x 4s as structural members, and 1x for decking boards.

 

Prepare the Site. Stakes and strings are used to outline the shape of the deck. The ledger is attached to the house, beside the deck.

 

Installation of Ledger, Footings and Posts. After digging holes and pouring concrete, posts can be embedded into the concrete itself.

 

Installation of Support Beams and Joists. Beams will provide support for the joists.

 

 

Lay the Decking. Decking boards are placed attached by 1 x 4 or 1 x 6 lumbers and finished it with stain and sealer immediately.